Hearth-and-home-technologies 6000GCF-IPI Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Four Hearth-and-home-technologies 6000GCF-IPI. Hearth and Home Technologies 6000GCF-IPI User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 61
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 1
DO NOT store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Immediately call your gas supplier from a
neighbor’s phone. Follow the gas suppli-
er’s instructions.
- If you cannot reach your gas supplier, call
the re department.
Installation and service must be performed
by a quali ed installer, service agency, or the
gas supplier.
WARNING: If the information in these
instructions is not followed exactly, a re
or explosion may result causing property
damage, personal injury, or death.
Owners Manual
Installation and Operation
DO NOT DISCARD THIS MANUAL
NOTICE
This appliance may be installed as an OEM installation in
manufactured home (USA only) or mobile home and must be
installed in accordance with the manufacturer’s instructions
and the manufactured home construction and safety standard,
Title 24 CFR, Part 3280 or Standard for Installation in Mobile
Homes, CAN/CSA Z240MH, in Canada.
This appliance is only for use with the type(s) of gas indicated
on the rating plate.
Installation and service of this appliance should be
performed by quali ed personnel. Hearth & Home
Technologies suggests NFI certi ed or factory trained
professionals, or technicians supervised by an NFI
certi ed professional.
Leave this manual with
party responsible for use
and operation.
DO NOT
DISCARD
WARNING
• Important operating
and maintenance
instructions included.
Read, understand and follow
these instructions for safe
installation and operation.
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas tter.
See Table of Contents for location of additional Commonwealth
of Massachusetts requirements.
This appliance has been supplied with an integral barrier
to prevent direct contact with the xed glass panel. DO
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install one.
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
DO NOT touch glass until it is cooled
NEVER allow children to touch glass
• Keep children away
CAREFULLY SUPERVISE children in same room as
replace.
Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other ammable
materials.
Keep clothing, furniture, draperies and other ammable
materials away.
Models:
6000GCF-IPI
6000GCF-IPILP
Vue de la page 0
1 2 3 4 5 6 ... 60 61

Résumé du contenu

Page 1 - Owner’s Manual

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 1• DO NOT store or use gasoline or other fl am-mable vapors and liquids i

Page 2 - A. Congratulations

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0810D. Clear SpaceWARNING! DO NOT place combustible objects in front of the

Page 3 - User Guide

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 11I. Lighting Instructions (IPI)The IPI system may be operated with two

Page 4 - 16 Reference Materials

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0812Initial Break-in Procedure• The fireplace should be run three to four ho

Page 5 - B. Limited Lifetime Warranty

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 13Glass CleaningFrequency: SeasonallyBy: HomeownerTools Needed: Protecti

Page 6

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0814VentingFrequency: SeasonallyBy: HomeownerTools needed: Protective glov

Page 7 - Listing and Code Approvals

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 15(Either cobrahead or SIT)Figure 3.1 IPI Pilot Flame Patterns

Page 8 - Massachusetts

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0816A. Typical Appliance SystemNOTICE: Illustrations and photos refl ect typ

Page 9

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 17B. Design and Installation ConsiderationsHeat & Glo direct vent ga

Page 10 - Figure 2.2 Clear Space

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08185 5 Framing and Clearances A. Selecting Appliance LocationWhen selecti

Page 11 - WARNING:

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 19CBDAB. Constructing the Appliance ChaseA chase is a vertical box-like

Page 12 - K. Frequently Asked Questions

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/082Listing Label Information/LocationModel Name: ___________________________

Page 13 - Maintenance and Service

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0820D. Mantel and Wall ProjectionsWARNING! Risk of Fire! Comply with all mi

Page 14

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 21Figure 6.3 Leveled Termination CapsA. Vent Termination Minimum Cleara

Page 15 - (Either cobrahead or SIT)

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0822ONPRQV= VENT TERMINALX= AIR SUPPLY INLET= AREA WHERE TERMINAL IS NOT PE

Page 16 - Installer Guide

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 23A. Approved PipeThis appliance is approved for use with Hearth & Ho

Page 17 - C. Tools and Supplies Needed

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0824V1 Minimum H1 + H2 Maximum1 ft. 305 mm Cannot do1 1/2 ft. 457 mm 1-1/2 f

Page 18 - Framing and Clearances

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 25Figure 7.5Top Vent - Horizontal Termination - (continued)Three ElbowsH

Page 19 - ABCDE F GHIJK

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0826Top Vent - Vertical TerminationNo ElbowFigure 7.6Note: If installing a v

Page 20 - Note: All

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 27Figure 7.11Two ElbowsH1V1V2Three ElbowsINSTALLEDHORIZONTALLYH1H2V1V2Top

Page 21 - Termination Locations

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0828A. Pipe Clearances to CombustiblesWARNING! Risk of Fire! Maintain air s

Page 22 - Covered Alcove Applications

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 29A12 in.10 in.BFigure 8.6 Wall PenetrationB. Wall Penetration FramingA

Page 23 - 8-1/2 in

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 3 Safety Alert Key:• DANGER! Indicates a hazardous situation which, if

Page 24 - Figure 7.4

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0830C. Install the Ceiling FirestopA ceiling fi restop MUST be used between

Page 25 - Three Elbows

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 31D. Install Attic Insulation ShieldWARNING! Fire Risk. DO NOT allow loo

Page 26 - 1 2 3 4 5

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0832A. Attaching Sheetrock LedgesAttach sheetrock ledges together using the

Page 27 - Two Elbows

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 33C. Securing and Leveling the ApplianceWARNING! Risk of Fire! Prevent c

Page 28 - Figure 8.4

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/083410 10 Installing Vent Pipe A. Assemble Vent SectionsAttach Vent to t

Page 29

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 35B. Assemble Slip Sections• Slide the inner fl ue of the slip section i

Page 30

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0836D. Disassemble Vent Sections• Rotate either section (see Figure 10.10)

Page 31

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 37E. Install Metal Roof FlashingNote: Skip this section if using the RF4

Page 32 - B. Temporary Access Panel

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0838G. Install RF4-8The RF4-8 may be used in place of the roof fl ashing and

Page 33 - Figure 9.5 Fiberglass Gasket

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 39SCREWSCAULKSTORM COLLAR(1 of 3)Figure 10.23 Figure 10.23 TERMINATIO

Page 34 - Installing Vent Pipe

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/084 = Contains updated information.13 Finishing A. Mantel and Wall Proj

Page 35 - C. Secure the Vent Sections

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0840Figure 10.25 Venting through the wallINTERIORHEAT SHIELD OREXTENDEDHEA

Page 36 - D. Disassemble Vent Sections

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 41A. Fuel Conversion• Make sure the appliance is compatible with availab

Page 37

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0842A. Wiring RequirementsNOTICE: This appliance must be electrically wired

Page 38 - G. Install RF4-8

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 43D. Electrical Service and RepairWARNING! Risk of Shock! Label all wire

Page 39 - Figure 10.23

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0844F. Wall Switch Installation for Fan (Optional)If the box is being wired

Page 40

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 45A. Mantel and Wall ProjectionsWARNING! Risk of Fire! Comply with all m

Page 41 - Gas Information

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0846A. Remove Fixed Glass AssemblySee Section 14.I.B. Remove the Shipping

Page 42 - Electrical Information

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 47G. Ember PlacementWARNING! Risk of Explosion! Follow ember placement i

Page 43

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0848H. Install the Log AssemblySTEP 2. Place the metal grate on top of the

Page 44 - E. Junction Box Installation

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 49Figure 14.19 Top ViewFigure 14.13 Top ViewSTEP 5. Log #3 (SRV2103-1

Page 45 - Finishing

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 5B. Limited Lifetime WarrantyHearth & Home Technologies LIMITED WARR

Page 46 - Appliance Setup

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0850M. Air Shutter SettingAir shutter settings should be adjusted by a quali

Page 47 - EMBER MATERIAL

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 5115 15 Troubleshooting With proper installation, operation, and mainten

Page 48 - STEP 3

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0852Intellifi re Ignition System - (continued)Symptom Possible Cause Correcti

Page 49

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 5316 16 Reference Materials A. Appliance Dimension DiagramDimensions a

Page 50 - WING NUT

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0854B. Vent Components DiagramsFigure 16.2 DVP vent components 10-1/2 in.(

Page 51 - Troubleshooting

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 55DVP-TRAP1DVP-TRAP2DVP-TRAPK2DVP-TRAPK1DVP-TRAPHorizontal Termination Ca

Page 52

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0856B. Vent Components Diagrams (continued)Figure 16.4 DVP vent components

Page 53 - Reference Materials

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 57B. Vent Components Diagrams (continued)DVP-HRC-SSDVP-HRC-ZC-SSHORIZONT

Page 54 - Inches Millimeters

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0858C. Service PartsPart number list on following page.Service Parts Diagram

Page 55 - DVP-TRAPK1

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 59C. Service Parts List 6000GCF-IPIIMPORTANT: THIS IS DATED INFORMATION

Page 56 - Extended Heat Shield

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/086B. Limited Lifetime Warranty (continued)• This limited warranty does no

Page 57

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/0860Intermittent Pilot IgnitionValve AssemblyService PartsValve Assembly Dia

Page 58 - 6000GCF-IPI

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 61Heat & Glo, a brand of Hearth & Home Technologies Inc. 7571 215

Page 59 - Stocked

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 7B. Tempered Glass Specifi cationsHearth & Home Technologies applianc

Page 60

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/088H. Requirements for the Commonwealth of MassachusettsFor all side wall ho

Page 61 - DO NOT DISCARD THIS MANUAL

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. H • 11/08 9Figure 2.1 General Operating PartsB. Your FireplaceWARNING! DO NOT oper

Modèles reliés 6000GCF-IPIL

Commentaires sur ces manuels

Pas de commentaire